Millipore Spectroquant Multy Operating Manual page 27

Enter the end code No. (max. 6 digits), e.g.: [1] [0].
Confirm by pressing [Enter].
The display shows:
Pressing the [Enter] key shows all saved test results for the
selected code-No. range.
Pressing the [F3] key prints out the result shown on the display.
Pressing the [F2] key prints out all selected results.
Exit by pressing the [Esc] key.
Note
To show test results with one and the same code No., enter the
same number for both the start and the end code No.
To show all test results without the code No. (code No. = 0),
enter a zero [0] for both the start and the end code No.
<storage>
sorted: Code-No.
from 000001
to 000010
Start: cancel:ESC
print:F3
print all:F2
en
29