Deleting Saved Measurement Results - Millipore Spectroquant Multy Operating Manual

2.9 Deleting saved
measurement results
Press the keys [Mode] [3] [4] in succession.
Confirm your selection by pressing [Enter].
The display shows:
Pressing the [0] key saves the data for further use.
Pressing the [1] key deletes the data from the memory records.
The display shows:
or, respectively,
Confirm by pressing [Enter].
In the event that you press the [1] key by mistake, you can
exit the menu by pressing the [Esc] key if you wish to save the
data from deletion.
Note
All saved measurement results are deleted by this operation,
irrespective of the method.
<Delete data>
Delete all Data?
YES:1 NO:0
<Delete data>
Delete all Data?
YES:1 NO:0
do not delete
<Delete data>
Delete all Data?
YES:1 NO:0
Delete Data
en
31