Millipore Spectroquant Multy Operating Manual page 274

5.9 Technical specifications
Display
Graphic display (7 lines, 21 characters)
Serial interface
RS232 for printer and PC connection
9-pole D-subjack, data format ASCII,
8-bit data, parity: none, 1 start bit, 1 stop bit,
baud rate and flow control: configurable
Pinout:
Pin 1 = free
Pin 2 = Rx data
Pin 3 = Tx data
Pin 4 = free
Pin 5 = GND
Optics
Light diodes and photosensor amplifier in protected
measurement-compartment array.
Wavelength ranges:
1 = 430 nm IF
 2 = 530 nm IF
 3 = 560 nm IF
 4 = 580 nm IF
 5 = 610 nm IF
 6 = 660 nm IF
IF = interference filter
Photometric accuracy
0.100 Abs ± 0.008 Abs
1.000 Abs ± 0.020 Abs
(measured with standard solutions)
Operation
Acid- and solvent-resistant tactile film keyboard with
acoustic feedback via integrated beeper
Power supply
7 nickel-cadmium batteries (type AA with 750 mAh);
External mains adapter (Input: 100-240 V, 47-63 Hz, 400 mA,
output: 15V =/ 1A) with country-specific wall-socket adapters
Lithium powerpack (CR 2032, 3V), for data storage when no
power is being supplied via the battery pack or mains adapter
Pin 6 = free
Pin 7 = RTS
Pin 8 = CTS
Pin 9 = free
  (nm) = 5
  (nm) = 5
  (nm) = 5
  (nm) = 5
  (nm) = 6
  (nm) = 5
Chapter 5.9 | Page 1 of 2