Millipore Samplicity Quick Start Manual

Samplicity™ Filtration System with
Millex Samplicity™ Filters
Quick-Start Guide
Full length user guide is available at www.millipore.com. Search on key word "Samplicity ".
Before using the Samplicity Filtration System, please read the full length user guide completely.
1 2 3 4 5 6 7 8
1. With system handle in the OFF position,
attach quick disconnect end of tubing to
system and other end to vacuum source.
Place vial tray on system base with tray
numbers facing forward.
5. Place one to eight Millex Samplicity
Filters over the openings, with the M
logos facing forward. Filters can be
separated from the strip by twisting
them at the perforations.
PR03530_RevA.indd 1
1 2 3 4 5 6 7 8
2. Place one to eight uncapped
12 x 32 mm vials in the vial
tray.
6. Add samples (0.2–1.7 mL)
to filters.
1 2 3 4 5 6 7 8
3. Place lid over vials.
7. Turn vacuum on at the source,
then rotate system handle
forward. Vacuum will pull
samples through the filters and
into the vials.
4. Open doors directly above the
positions where vials have been
installed. Close doors above
empty positions.
8. When all filters are empty, rotate
the system handle up and wait for
the vacuum pressure to release.
Remove filters, then remove lid to
access sample vials.
3/14/2011 8:05:14 AM