Saving Measurement Results - Millipore Spectroquant Multy Operating Manual

2.7

Saving measurement results

Press the [Store] key while the result is shown on the display.
The display shows
(Example: Method 31, Ammonium 14558):
The user is able to enter a six-digit code at this stage.
(The code No. can be used to show e.g. information regarding
the user or the sampling site.)
Confirm the code No. by pressing [Enter].
If you do not wish to enter a code No., simply confirm
by pressing [Enter]. (This results in the automatic assigment
of a code No. starting with 0.)
The entire data set is then stored together with the date, time,
code No., method, and result.
The display shows:
Note
The number of available memory records is also shown on the
display. Subsequently the measurement result is shown again.
When fewer than 30 free memory records are available,
the display shows:
It is advisable to delete the data memory as soon as possible
when no longer required (see section 2.9, "Deleting saved mea-
surement results"). When all memory records are occupied,
it is not possible to save any further results.
31 Ammonium 14588
0.20-8.00 mg/l NH4-N
Code-No.:
_ _ _ _ _ _
31 Ammonium 14588
0.20-8.00 mg/l NH4-N
Stored!
storage: 997
free records left
storage: only 29
free records left
en
25