Millipore Spectroquant Multy Operating Manual page 18

en
20
In the event the result lies outside the respective measuring
range, the following message appears on the display:
the concentration of the sample lies below the measuring range
or, respectively,
the concentration of the sample lies above the measuring range.
After the result has been displayed
• it can be saved (see section 2.7, "Saving measurement results"
and section 2.8, "Retrieving saved measurement results" for
further details)
• it can be printed out (see section 5.3)
• a new method can be selected:
pressing the [Esc] key takes the colorimeter back to the
method-selection mode;
you can also enter a new method number directly
(confirm by pressing [Enter])
• further measurements can be made using the same or a
new zero setting:
• If you wish to measure other samples using the same method:
Press the [Test] key.
The display shows:
Confirm by pressing [Test].
90 Bromine 00605
0.10 - 5.00mg/l Br2
Underrange Br2
90 Bromine 00605
0.10 - 5.00mg/l Br2
Overrange Br2
90 Bromine 00605
0.10-5.00 mg/l Br2
Zero accepted
prepare Test
press TEST