Retrieving Saved Measurement Results From A Defined Method - Millipore Spectroquant Multy Operating Manual

2.8.4 Retrieving saved measurement results
from a defined method
en
30
Press the keys [Mode] [3] [3] in succession.
Confirm your selection by pressing [Enter].
The display shows e.g.:
Select the desired method from the list or otherwise enter the
method number directly, e.g. 21 (aluminium 00594).
Confirm by pressing [Enter].
In the case of differentiated methods make the corresponding
new selection and confirm by pressing the [Enter] key.
The display shows:
Pressing the [Enter] key shows all saved test results for the
selected method.
Pressing the [F3] key prints out the result shown on the display.
Pressing the [F2] key prints out all selected results.
Exit by pressing the [Esc] key.
<storage>
>> 10 Acid cap. 01758
20 Aluminium 14825
21 Aluminium 00594
...
<storage>
method
21 Aluminium 00594
Start: cancel:ESC
print:F3
print all:F2