Millipore Spectroquant Multy Operating Manual page 225

Press the [2] key to set the baud rate.
The display shows:
Press the [] or [] arrow keys to select the desired
baud rate (600, 1200, 2400, 4800, 9600, 14400, 19200).
For the LQ 300, for example, select the baud rate 4800.
Confirm your selection by pressing [Enter].
Press to exit this mode.
[Esc]
One press of the [Esc] key takes you back to the mode menu,
two presses of the [Esc] key to the method-selection list.
If you wish to transfer data, connect the colorimeter with the
printer. The PC cable supplied with the photometer can be used
for this purpose (an adapter may be necessary).
When the printer is installed and switched on, the measure-
ment result can be printed out without having to be saved
beforehand:
Simply press the [F3] key.
The entire data set is printed out, stating the date, time,
method, and result.
Specimen printout
The serial number is an internal number that is automatically assigned
when a measurement result is saved. This number appears only on
the printout.
< Baud rate>
is:19200
select:  
save:
cancel:ESC
163 COD 14541
25-1500 mg/l
Profi-Mode: no
2004-07-01 14:53:09
Test No.: 1
Code-No.: 007
151 mg/l
Chapter 5.3 | Page 2 of 6