User Countdown (Timer Function) - Millipore Spectroquant Multy Operating Manual

2.6 User countdown
(timer function)
en
24
This function enables the user to employ a self-defined
countdown time.
Press the [Time] key.
The display shows the current time and date.
Press the [Time] key again.
The display shows:
Enter the time in double digits, in the sequence minutes and
seconds, e.g.: 2 minutes, 0 seconds = [0][2][0][0].
Confirm your selection by pressing [Enter].
The display shows:
Press the [Enter] key to start the countdown.
After the countdown has expired, the unit returns to the
previous routine.
Note
The user-countdown function is available even when the
preset countdown function is deactivated.
15.58.40 2004-10-21
count-down
mm:ss
count-down
2:00