Retrieving Saved Measurement Results; Retrieving All Saved Measurement Results - Millipore Spectroquant Multy Operating Manual

2.8 Retrieving saved
measurement results

2.8.1 Retrieving all saved measurement results

en
26
Press the keys [Mode] [3] [0] in succession.
Confirm your selection by pressing [Enter].
The display shows:
Confirm by pressing [Enter].
The data sets are then shown in reverse chronological sequence,
starting with the most recently saved measurement result.
Pressing the [] key takes you to the next data set.
Pressing the [] key takes you back to the previous data set.
Pressing the [F3] key prints out the result shown on the display.
Exit by pressing the [Esc] key.
If there are no data saved in the memory, the display shows:
<storage>
display all data
Start: cancel: ESC
print: F3
print all: F2
<storage>
display all data
no data