Retrieving Saved Measurement Results From A Defined Code-No. Range - Millipore Spectroquant Multy Operating Manual

en
2.8.3 Retrieving saved measurement results
from a defined code-No. range
28
Pressing the [Enter] key shows the saved test results
for the defined period of time.
Pressing the [F3] key prints out the result shown on
the display.
Pressing the [F2] key prints out all selected results.
Exit by pressing the [Esc] key.
Note
To show test results obtained on just one day, enter the same
date for both start and end date.
Press the keys [Mode] [3] [2] in succession.
Confirm your selection by pressing [Enter].
The display shows:
Enter the start code No. (max. 6 digits), e.g.: [1].
Confirm by pressing [Enter].
The display shows:
<storage>
sorted: Code-No.
from _ _ _ _ _ _
<storage>
sorted: Code-No.
from 1 _ _ _ _ _
to _ _ _ _ _ _