Millipore Spectroquant Multy Operating Manual page 260

5.6.2 User polynomials
Up to 25 user polynomials can be enetered and stored. The pro-
gramme enables the user to use polynomials up to the fifth
degree:
y = A + Bx + Cx
If a polynomial of a lower degree is required, the remaining
coefficients are set at zero (0); e.g. for a polynomial of the
second degree D, E, F are set at 0.
The values for the coefficients A, B, C, D, E, F must be entered
in accordance with scientific conventions with at most six
decimal places; e.g. 121.35673 = 1.213567E+02.
Entering a user polynomial
Press the keys [Mode] [6] [5] in succession.
Confirm your selection by pressing [Enter].
The display now shows:
Press the number keys to select a method number in the
range 800 to 824, e.g.: [8] [0] [0]
Confirm your selection by pressing [Enter].
Note
In the event that the entered number is already being
used as a storage slot for a polynomial, the following
message appears on the display:
• Press key [0] or [Esc] to return to method-No. prompt.
• Press key [1] to continue the entry.
+ Dx + Ex + Fx
2 3 4 5
<User polynoms>
choose no.: _____
(800-824)
overwrite polynom?
YES: 1 NO: 0
Chapter 5.6 | Page 7 of 13