Acoustic Signals; Activating/Deactivating The Key Beep; Activating/Deactivating The Signal Beep - Millipore Spectroquant Multy Operating Manual

3.3

Acoustic signals

3.3.1 Activating/deactivating the key beep

en

3.3.2 Activating/deactivating the signal beep

36
Press the keys [Mode] [1] [1] in succession.
Confirm your selection by pressing [Enter].
The display shows:
Pressing the [0] key deactivates the key beep function.
Press the [1] key activates the key beep function.
Confirm by pressing [Enter].
Note
In connection with methods that include a reaction time, the
unit emits an acoustic signal in the last 10 seconds before the
countdown expires even when the key beep function is inactive.
It takes the colorimeter approx. 8 seconds to perform a zero
calibration and measurements. It emits a brief signal beep at
the end of a measurement.
Press the keys [Mode] [1] [4] in succession.
Confirm your selection by pressing [Enter].
The display shows:
<Key-Beep>
ON:1 OFF:0
<signal-beep>
ON:1 OFF:0