Locking Of Parameter Sets - KEB COMBIVERT F4-F Applications Manual

Functional Description
Input-coded set selection
Fig. 6.8.3.c Input-coded parameter set selection
ID IB I4 I2
0 0 0 0
0 0 0 0
0 0 0 2
0 0 3 0
0 4 0 0
5 0 0 0
5 0 3 0
5 0 3 0
6.7.4 Locking of Para-
meter Sets
Parameter set lock (Fr.3)
Chapter Section Page
6 7 6
For bit-coded set selection
- maximal 7 of the internal or external inputs may be programmed for set selection
(0...7 sets) in order to avoid set selection errors.
- the lowest of the selected inputs has priority
(I1 > I2 > I3 > I4 > I5 > I6 > IA > IB > IC > ID)
Example 1: Set 0...5 shall be selected with 5 inputs (I1, I2, I4, IB und ID).
1.) Adjust parameter di.3, di.4, di.6, di.8 and di.10 to value „1"
Parameters di.5, di.7 and di.9 must be set to ≠ 1
2.)
3.) Adjust Fr.2 to value „3" (set selection input-coded by way of terminal strip)
ID
I1 Set
0 0
IB
1 1
0 2
I4
0 3
0 4
0 5
I2
0 3
1 1
I1
Set 5
Set 4
Set 3
Set 2
Set 1
Set 0
Parameter sets that shall not be selected can be locked with Fr.3. If one of the locked
sets is selected, the inverter switches off with set selection error (E.SEt).
Value
1
2
4
8
16
32
64
128
Set 2 and set 5 lcoked
Date Name: Basis
KEB COMBIVERT F4-F
08.03.99
Locked set Example
0 -
1 -
2 4
3 -
4 -
5 32
6 -
7 -
Sum 36
Parameter Sets
© KEB Antriebstechnik, 1999
All Rights reserved