KEB COMBIVERT F4-F Applications Manual page 90

Fucntional Description
ru.12 Peak DC voltage
Adr.
200Ch
ru.12 allows the detection of short-time voltage rises within an operating cycle. For that the highest detected value of
ru.11 is stored in ru.12. The peak value memory is cleared by pressing the keys UP or DOWN or by bus by writing any
chosen value to the address of ru.12. The disconnection of the inverter also results in a clearing of the memory.
ru.14 Input terminal state
Adr.
200Eh
Display of the actual triggered digital inputs. Whether the input is inverted or the internal acceptance takes place
through edge triggering or strobe is irrelevant for the display. According to following table a certain decimal value is
given out for each digital input. If several inputs are triggered then the sum of their decimal values is displayed.
Bit -No.
ru.15 Output terminal state
Adr.
200Fh
Display of the currently set external and internal digital outputs. According to following table a certain decimal value is
given out for each digital output. If several outputs are set then the sum of their decimal values is displayed.
Bit -No.
Chapter Section Page
6 1 10
min max
200 999
min max
0 127
Decinal value
0 1
1 2
2 4
3 8
4 16
5 32
6 64
min max
0 247
Decimal value
0 1
1 2
2 4
4 16
5 32
6 64
7 128
Date Name: Basis
16.03.99 KEB COMBIVERT F4-F
%
1
-
1
Input (standard program)
ST (control release)
I4 (Reset)
I5 (rotation Forward)
I6 (rotation Reverse)
I1 (prog. input 1)
I2 (prog. input 2)
I3 (prog. input 3)
-
1
Output
D1 (transistor output)
D2 (transistor output)
Out 3 (output relay)
Out A (internal output A)
Out B (internal output B)
Out C (internal output C)
Out D (internal output D)
ru-Parameter
default
-
default
-
Terminal
X2.1
X2.2
X2.3
X2.4
X2.5
X2.6
X2.7
default
-
Terminal
X2.8
X2.9
X2.20 , 21 , 22
none
none
none
none
© KEB Antriebstechnik, 1999
All Rights reserved