KEB COMBIVERT F4-F Applications Manual page 259

Limit switch error
Limit switch error
CPU-error
Control card defect
Software limit forward
Software limit reverse
Error incremental encoder
© KEB Antriebstechnik, 2001
All Rights reserved
Occurs when terminal F was not active at set direction clockwise or counter-clockwise
(refer to di- and Pn-Parameter for terminal handling).
Occurs when terminal R was not active at set direction clockwise or counter-clockwise
(refer to di- and Pn-Parameter for terminal handling).
Hardware error
Hardware error
Occurs when a setpoint position outside the permissible range has been selected for
the positioning (refer to Pc-Parameter).
Occurs when a setpoint position outside the permissible range has been selected for
the positioning (refer to Pc-Parameter).
Missing reference signal (zero track) at the reference drive, at Pc.10 = „4" or „5".
Name: Basis
KEB COMBIVERT F4-F
Error Assistance
Date Chapter
9
19.02.01
ANTRIEBSTECHNIK
9
Section Page
5
1 5