Example; Used Parameters - KEB COMBIVERT F4-F Applications Manual

CP-Parameter Definition

6.12.4 Example

6.12.5 Used Parameters

R/W PROG.
Param. Adr.
✔
ud.0 2600h
✔
ud.1 2601h
✔
ud.2 2602h
✔
ud.3 2603h
ud.13 260Dh -
ud.14 260Eh -
✔
ud.15 260Fh
✔
ud.16 2610h
© KEB Antriebstechnik, 1999
All Rights reserved
For example a user menu shall be programmed with following characteristics:
1. Display of actual frequency (ru.1) in the respective set
2. Absolute digital setpoint setting (SP . 1) in set 2
3. Absolute digital setpoint setting (SP . 1) in set 3
4. Acceleration and deceleration time (SP .11/SP .12) in the respective active set
5. On switch on the active parameter set (ru.18) shall be displayed
1.) ud.15 = 2001
ud.16 = A
2.) ud.17 = 3001
ud.18 = 2
3.) ud.19 = 3001
ud.20 = 3
4.) ud.21 = 300B
ud.22 = A
ud.23 = 300C
ud.24 = A
5.) ud.27 = 2012
ud.28 = A
ud.2 = 1
ud.3 = 7
adjust all other parameter addresses to „off" so that no indication occurs.
ENTER
min
✔
- 0 9999
- - -32767 32767
- - 1(ru) 16(Pd)
- - 0 *255
- - -
- - -
✔
- -1 (off) 7FFF
✔
- 0
Name: Basis
KEB COMBIVERT F4-F
Functional Description
; Parameter address for ru.1
; Display in the active set
; Parameter address for SP . 1
; Preadjustment in set 2
; Parameter address for SP . 1
; Preadjustment in set 3
; Parameter address for SP .11
; Preadjustment in the respective set active at the time
; Parameter address for SP .12
; Preadjustment in the respective set active at the time
; Parameter address for ru.18
; Display in the active set
; Disply of ru-Parameter (by activating the CP-mode this
; this setting is ignored)
; Display of CP .7
Step
max
default
1 cp_on
1 cp_on
1 1 (ru)
*1 1
- - -
- - -
1 2001
8 1 0
ANTRIEBSTECHNIK
-
only visible by bus
ru/SP/Pn/dr/cs/ds/ud/Fr/An/di/do/LE/In/Sn/Pc/PdAA
* dependent on parameter group
only visible by bus
only visible by bus
corresponds to ru.1
set 0...7; A(8) = active set
Date Chapter Section
6 12
15.03.99
6
Page
5
5