Operation; Fundamentals; Parameter, Parameter Groups, Parameter Sets - KEB COMBIVERT R6-N Programming Manual

2.

Operation

The fundamentals of the software configuration, as well as the operation of the unit are described in the present
chapter.

2.1 Fundamentals

The control boards R6 contain the following operation modes:
- is a freely definable list of parameters (CP-Pa-
rameters), which are necessary or important for
the end user
- delivered condition with a parameter list defined
by KEB

2.1.1 Parameter, parameter groups, parameter sets

What are parameters, parameter groups and parameter sets?
Parameters are values changeable by the user in a program, which affect the program flow. A parameter con-
sists of
Parameter designation
© KEB, 2015-07
Operation modes of the
Customer mode
COMBIVERT R6-N
Control board
Application mode
- all parameters, parameter groups (exception:
CP-Parameters) and parameter sets can be se-
lected and changed if necessary
- is generally activated only for application adaption
Parameter value
The parameter value indicates the actual adjustment.
The parameter number determines the parameter within
a group.
All parameters are listed function-related in parameter
groups in order that the operation remains clear despite
of the multitude of parameters.
There are 8 parameter sets (0...7) in order to preset sev-
eral values for a parameter.If the respective active values
shall be indicated during operation, set the digit to „A ".
The digit is not applicable at set-programmable parame-
ters.
Fundamentals
Page2.1 - 3
2
10