KEB COMBIVERT F4-F Applications Manual page 51

CP - Parameter
P-Factor Speed Controller
I-Factor Speed Controller
Encoder 1 (inc/r)
© KEB Antriebstechnik, 1998
All Rights reserved
Input Speed Ratio
I1 / I2
is Actual speed dis. (CP .1) <
activated Jogging speed (CP.11)
is Actual speed dis. (CP .1) >
activated Jogging speed (CP.11)
is Speed reference dis. (CP .6) <
deactivated Jogging speed (CP.11)
is Speed reference dis. (CP .6) > drive accelerates in accord.
deactivated Jogging speed (CP.11)
Proportional factor of the speed controller.
Adjustment Range:
Resolution:
Factory setting:
Customer setting:
! see also parameter CP.36 !
Integral factor of the speed controller.
Adjustment Range:
Resolution:
Factory setting:
Customer setting:
! see also parameter CP.36 !
Adjusts the increments of the incremental encoder used. Check the set and actual
speed displays during open-loop operation and compare.
The correct setting is: actual speed = set speed - slip
Adjustment Range:
Resolution:
Factory setting:
Customer setting:
Name: Basis
KEB COMBIVERT F4-F
Operation
Acceleration/
Deceleration Performance
drive accelerates on
the torque limit
drive accelerates in accord.
with the adjusted ramp
drive decelerates on
the torque limit
with the adjusted ramp
0...65535
1
400
________
0...65535
1
200
________
256...10000
1
2500
________
Date Chapter
4
15.12.98
ANTRIEBSTECHNIK
4
Section Page
11
3 11