Check List - KEB COMBIVERT F4-F Applications Manual

Positioning Module

6.11.18 Check List

© KEB Antriebstechnik, 1999
All Rights reserved
1 Positioning module activated
2 Select mode of position setting
(increments / revolutions)
3 Parameter set selection activated
4 Inputs for selection of positions
(parameter sets) defined
5 Reference point approach defined or disabled
6 Positioning in the individual sets enabled / disabled
7 Setpoint positions and traversing mode defined
in the sets
8 Drive profile for the approach of the positions defined
9 Target window defined
10 Software-limit positions adjusted or disabled
11 Hardware-limit switch activated
12 Starting command for positioning defined
13 Speed controller and position controller adjusted
14 If necessary, program digital output
(e.g. target window reached)
Name: Basis
KEB COMBIVERT F4-F
Functional Description
Date
17.06.99
ANTRIEBSTECHNIK
Pc.0 = 1
Pc.1
Fr.2 = 1...3
di.3...di.12 = 1
Pc.10..Pc.14,
di.3...di.12
Pd.0
Pd.8...Pd.11
Pd.5...Pd.7
Pd.12
Pc.4...Pc.9
di.3...di.6,
di.11...di.12, Pn.24
di.3...di.6,
di.11...di.12
CS.0, CS.1, Pd.2,
Pd.3
do.-Par.
Chapter Section Page
17
6 11 17
6