KEB COMBIVERT F4-F Applications Manual page 62

Operation
Aux Function
Chapter Section Page
4 3 22
In CP .36 you can adjust on which parameter the 2nd analog input REF2 should work
(X2.16 / X2.17). During open-loop operation values 2; 3; 4 and 5 do not have a
function !
Adjustment range:
Resolution:
Factory setting:
Customer setting:
Factor 1 or CP.10
(see table)
Value Function Analog Input REF2
0 no function
1 adds to the setpoint (has no influence on the Jogging operation) 1 0
V = CP.10
2 works as a multiplier for parameter CP.12 (P-factor of the speed
controller)
3 works as a multiplier for parameter CP.13 (I-factor of the speed
controller)
4 works as a multiplier for parameter CP.12 + CP.13 (total gain of the speed
cotnroller)
5 works as a multiplier for parameter CP.9 (torque limit)
6 torque control; only available in the application mode
Date Name: Basis
15.12.98 KEB COMBIVERT F4-F
0...6
________
n [rpm]
U [V]
(REF 2)
0 +10
CP - Parameter
1
0
10 V = gain 1
10 V = gain 1
10 V = gain 1
10 V = gain 1
© KEB Antriebstechnik, 1998
All Rights reserved