KEB COMBIVERT F4-F Applications Manual page 95

ru-Parameter
ru.37 Actual position low
Adr.
2025h
Only active at activated positioning module!!! Indicates with ru.36 the absolute actual position from the reference point.
Depending on Pc.1 following representation is possible:
When displayed in increments (Pc.1 = 0 or 1) increments in a range of 0...9999 are displayed.
When displayed in rotations (Pc.1 = 2 or 3) partial rotations in a range of 0...65535 are displayed. (1 rotation = 65535)
ru.38 Set position sign
Adr.
2026h
Only active at activated positioning module!!! Indicates at decimal position display (Pc.1 = 0 or 1) the sign of the
setpoint position. At hexadecimal display (Pc.1 = 2 or 3) the parameter is without function.
0: Setpoint position in positive direction from the reference point
1: Setpoint position in negative direction from the reference point
2: Without function since hexadecimal display is selected
ru.39 Set position high
Adr.
2027h
Only active at activated positioning module!!! Indicates the absolute setpoint position from the reference point. Depending
on Pc.1 following representation is possible:
When display in increments (Pc.1 = 0 or 1) the displayed value must be multiplied with 10000 Inc.
When display in rotations (Pc.1 = 2 or 3) the displayed value is correspond to coplete motor rotations.
ru.40 Set position low
Adr.
2028h
Only active at activated positioning module!!! Indicates with ru.36 the absolute setpoint position from the reference
point. Depending on Pc.1 following representation is possible:
When displayed in increments (Pc.1 = 0 or 1) increments in a range of 0...9999 are displayed.
When displayed in rotations (Pc.1 = 2 or 3) partial rotations in a range of 0...65535 are displayed. (1 rotation = 65535)
© KEB Antriebstechnik, 1999
All Rights reserved
min max
0 9999 (65535)
min max
0 1
min max
0 (-65535) 65535
min max
0 9999 (65535)
Name: Basis
KEB COMBIVERT F4-F
Functional Description
inc
1
-
1
inc
1
inc
1
Date
16.03.99
ANTRIEBSTECHNIK
default
-
depend on Pc.1
default
-
default
-
depend on Pc.1
default
-
depend on Pc.1
Chapter Section Page
15
6 1 15
6