KEB COMBIVERT F4-F Applications Manual page 274

Networks
Description
Optical Fibre Interface
Pin assignment 9-pole SUB-D socket (Master)
PIN Signal Significance
1 - free
2 TxD transmitter signal / RS232
3 RxD receive signal / RS232
4 - free
5 DGND data reference potential
6 - free
7 - free
8 - free
9 - free
Pin assignment 9-pole SUB-D connector (Slave)
PIN Signal Significance
1 - free
2 TxD transmitter signal / RS232
3 RxD receive signal / RS232
4 - free
5 - free
6 - free
7 DGND data reference potential
8 - free
9 - free
Description
Optical Fibre Operator
Chapter Section Page
11 1 6
The difference between LWL-Interface Master and Slave is as follows:
The Master has a 9-pole SUB-D socket and the Slave a 9-pole SUB-D connector. It
must be taken into consideration that the PIN's of the connector must be assigned in
the opposite of the socket in mirror position.
The housing is on all common DIN EN mounting rails mountable.
Receiving-
LED
Date Name: Option
00.F4.Z1A-KB15
05.01.99
Receiver
Switch
Transmitter
9-pole SUB-D
socket
Transmitter- Transmitter
LED
Network Hardware
22,5 mm
Transmitter-
LED
Receiving-
LED
Operating
voltage-LED
+ -
15 ... 30 V DC
B A
Receiver
Switch
© KEB Antriebstechnik, 1998
All Rights reserved