Table of Contents
Advertisement
Reading Parameters
LED and Speaker Indicators
Power On Alert
Disables or enables the indication (from the Speaker) that the scanner is receiv-
ing power.
$CBPPU01
Power On Alert = Power-up Beep
Audio Jingles
The scanner can be set up to sound a predefined "Jingle" (a short, user-defined
tune uploaded via Datalogic Aladdin™ configuration software) or traditional
beep sounds to indicate good read and power-up events.
To upload a jingle in Aladdin:
1. Install Datalogic Aladdin™ (v 1.7.0.0.0 or later) on your computer.
2. Connect the scanner you want to program to the computer.
3. Use Device Autodetection to allow Aladdin to search for your reader, or
4. After the Configuration screen opens, click on the music icon in the menu
You will be prompted to specify a sound file to upload. The supported format of
audio files is WAV uncompressed PCM. Best quality is obtained using stereo
audio files with 16 bit encoding.
Up to 15 jingles can be uploaded and programmed.
Product Reference Guide
click on Offline Configuration to select the file for your device.
bar in the upper right-hand part of the screen:
Enter/Exit Programming Mode
$CBPPU00
Power On Alert = Disable (No Audible Indication)
DEFAULT
65
Advertisement
Table of Contents
