Label Id; Label Id: Pre-Loaded Sets - Datalogic Gryphon Series Product Reference Manual

Enter/Exit Programming Mode

Label ID

A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the
ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology
type. It can be appended previous to or following the transmitted bar code data depending upon
how this option is enabled. This feature provides options for configuring custom Label IDs or
individually per symbology (see "Individually Set Label ID" on page 81). If you wish to
program the reader to always include an industry standard label identifier for ALL symbology
types, see the previous feature "Global AIM ID" on page 77.
See Label ID, starting on page 269

Label ID: Pre-Loaded Sets

The reader supports two pre-loaded sets of Label IDs. See
page 269
$Ae(CR)
Label ID Pre-loaded Set = EU Set
80
for details on the USA set and EU set.
When changing from one Label ID set to another, all other reader
configuration settings, including the host interface type, will be
erased and set to the standard factory defaults. Any custom config-
uration or custom defaults will be lost.
CAUTION
of "References" for more information on setting this feature.
Label ID: Pre-loaded Sets, starting on
$AE(CR)
Label ID Pre-loaded Set = USA Set
Gryphon™ I GD44XX/GBT4400/GM440X
Label ID
DEFAULT