Enter/Exit Programming Mode
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a bar code (symbology) type. It can be appended previous to or following
the transmitted bar code data depending upon how this option is enabled. This feature
provides options for configuring custom Label IDs as a pre-loaded set (see
loaded Sets"
Symbology"
standard label identifier for ALL symbology types, see the previous feature
page 47.
Label ID: Pre-loaded Sets
The scanner supports two pre-loaded sets of Label IDs. shows the USA set and the EU set.
"Label ID: Pre-loaded Sets"
See
sets that are provided.
CAUTION
DEFAULT
Label ID Pre-loaded Set = EU Set
48
on page 48) or individually per symbology (see
on page 49). If you wish to program the scanner to always include an industry
When changing from one Label ID set to another, all other scanner configura-
tion settings, including the host interface type, will be erased and set to the
factory defaults. Any custom configuration or custom defaults will be lost.
$Ae
on page 232 for more information concerning the pre-loaded
Label ID Pre-loaded Set = USA Set
"Label ID: Pre-
"Label ID: Set Individually Per
"Global AIM ID"
$AE
Cobalto™ CO5300 Scanner
Label ID
on