Enter/Exit Programming Mode
Label ID
A Label ID is a customizable code of up to three ASCII characters (convert to
Hex using the ASCII Chart on the inside back cover of this manual), used to
identify a bar code symbology type. It can be appended previous to or following
the transmitted bar code data depending upon how this option is enabled. This
feature provides options for configuring custom Label IDs or individually per
symbology (see
the reader to always include an industry standard label identifier for ALL sym-
bology types, see the previous feature
See
Label ID, starting on page 287
ting this feature.
Label ID: Pre-Loaded Sets
The reader supports two pre-loaded sets of Label IDs. See
Sets, starting on page 287
$Ae(CR)
Label ID Pre-loaded Set = EU Set
84
"Individually Set Label ID"
for details on the USA set and EU set.
When changing from one Label ID set to another, all other
reader configuration settings, including the host interface type,
will be erased and set to the standard factory defaults. Any
custom configuration or custom defaults will be lost.
CAUTION
on page 85). If you wish to program
"Global AIM ID"
on page 81.
of "References" for more information on set-
$AE(CR)
Label ID Pre-loaded Set = USA Set
DEFAULT
Gryphon™ I GD44XX/GBT4400/GM440X
Label ID: Pre-loaded