Keyboard Send Control Characters - Datalogic QuickScan I QM2131 Product Reference Manual

Keyboard Interface

Keyboard Send Control Characters

This feature is used by the Keyboard Wedge and USB Keyboard interfaces. It
specifies how the reader transmits ASCII control characters to the host. Refer-
ence
Options are as follows:
Send Ctrl+Key :
the format Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key :
in the format Ctrl+Shift+Keys.
Send Special Function Key :
the special function key mapping table (see
1252"
set. A unique set is provided for each available scancode set.
DEFAULT
$CKBSC01
Keyboard Send Control Characters = 01
Product Reference Guide
Appendix E, for more information about control characters.
ASCII characters from 00H to 0x1FH inclusive are transmitted in
The behavior is the same as above, but control keys are sent
Send characters between 00H and 1FH according to
on page 348). This is used to send keys that are not in the normal ASCII

Enter/Exit Programming Mode
"Microsoft Windows Codepage
$CKBSC00 
Keyboard Send Control Characters = 00
$CKBSC02 
Keyboard Send Control Characters = 02
47