Keyboard Send Control Characters - Datalogic Cobalto CO5330 Product Reference Manual

Enter/Exit Programming Mode

Keyboard Send Control Characters

This feature is used by the Keyboard Wedge and USB Keyboard interfaces. It specifies how the
scanner transmits ASCII control characters to the host. Reference
Tables
Options are as follows:
Send Ctrl+Key —
Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key —
format Ctrl+Shift+Keys.
Send Special Function Key —
function key mapping table (see Scancode
that are not in the normal ASCII set. A unique set is provided for each available scancode set.
DEFAULT
$CKBSC01
Keyboard Send Control Characters = Send Ctrl+Shift+Key
38
for more information about control characters.
ASCII characters from 00H to 0x1FH inclusive are transmitted in the format
The behavior is the same as above, but control keys are sent in the
Send characters between 00H and 1FH according to the special

Keyboard Send Control Characters
Table 28 on page 273
$CKBSC00
Keyboard Send Control Characters = Send Ctrl+Key
$CKBSC02
Keyboard Send Control Characters = Send Special
Function Key :
Cobalto™ CO5300 Scanner
Appendix E, Scancode
). This is used to send keys

