Keyboard Send Control Characters - Datalogic Heron HD3100 Product Reference Manual

Keyboard Interface

Keyboard Send Control Characters

This feature is used by the Keyboard Wedge and USB Keyboard interfaces. It
specifies how the scanner transmits ASCII control characters to the host. Refer-
ence
ters.
Options are as follows:
Send Ctrl+Key :
the format Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key :
in the format Ctrl+Shift+Keys.
Send Special Function Key :
the special function key mapping table (see
Mode or USB-Keyboard Alt Mode" on page
are not in the normal ASCII set. A unique set is provided for each available
scancode set.
DEFAULT
$CKBSC01
Keyboard Send Control Characters = Send Ctrl+Shift+Key
Product Reference Guide
Appendix E, Scancode Tables
ASCII characters from 00H to 0x1FH inclusive are transmitted in
The behavior is the same as above, but control keys are sent
Send characters between 00H and 1FH according to

Enter/Exit Programming Mode
for more information about control charac-
"Interface Type PC AT PS/2 Alt
282). This is used to send keys that
$CKBSC00
Keyboard Send Control Characters = Send Ctrl+Key
$CKBSC02
Keyboard Send Control Characters = Send Special Function
Key :


41