Micro Qr Code Set Length 1 - Datalogic Gryphon I GM440 Series Product Reference Manual

Enter/Exit Programming Mode
Micro QR Code
Specifies one of the bar code lengths for Micro QR Code Length Control.
Length 1 is the minimum label length if in
fixed length if in Fixed Length Mode. Characters can be set from 0001 to
0035 characters in increments of 0001 (pad with zeroes).
See
$CMQL1
Select Micro QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
232
Set Length 1
page 283 for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Variable Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
CANCEL
Gryphon™ I GD44XX/GBT4400/GM440X
Micro QR Code
Mode, or the first
representing