Micro Qr Code Set Length 1; Micro Qr Code Set Length 2 - Datalogic QuickScan QD2590 Product Reference Manual

MICRO QR CODE

Micro QR Code Set Length 1

This feature specifies one of the bar code lengths for "
page 212
fixed length if in Fixed Length Mode. Characters can be set from 0001 to 0035 characters
in increments of 0001 (pad with zeroes).
See "
Select Micro QR Code Length 1 Setting
$CMQL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Micro QR Code Set Length 2

This feature specifies one of the bar code lengths for "
page 212
ond fixed length if in Fixed Length Mode. Characters can be set from 0001 to 0035 char-
acters in increments of 0001 (pad with zeroes).
See "
Select Micro QR Code Length 2 Setting
$CMQL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
. Length 1 is the minimum label length if in Variable Length Mode, or the first
Set Length 1" on page 249

0001 = Length 1 is 1 Character
. Length 2 is the maximum label length if in Variable Length Mode, or the sec-
Set Length 2" on page 250

Length 2 i s 0035 Characters
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
ENTER/EXIT PROGRAMMING MODE
Micro QR Code Length Control" on
Appendix D, Keypad represent-
CANCEL
Micro QR Code Length Control" on
Appendix D, Keypad represent-
CANCEL
PRODUCT REFERENCE GUIDE
213