Pdf417 Set Length 1 - Datalogic Gryphon I GM440 Series Product Reference Manual

PDF417

PDF417 Set Length 1

Specifies one of the bar code lengths for
is the minimum label length if in
length if in Fixed Length Mode. Length includes the bar code's data charac-
ters only. Characters can be set from 0001 to 2,710 characters (pad with
zeroes) in increments of 01. Any value greater than 2,710 will be considered
to be 2,710.
See
$CP4L1
Select PDF417 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
page 283 for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
PDF417 Length
Variable Length Mode, or the first fixed
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
CANCEL
Control. Length 1
representing
223