Pdf417 Set Length 1 - Datalogic QuickScan I QD24 Series Product Reference Manual

PDF417 Set Length 1

Specifies one of the bar code lengths for
Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the bar code's data
characters only. Characters can be set from 0001 to 2,710 characters (pad with zeroes) in increments of 01. Any
value greater than 2,710 will be considered to be 2,710.
See page 217 for detailed instructions on setting this feature.
$CP4L1
Select PDF417 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
PDF417 Length
DEFAULT
Control. Length 1 is the minimum label length if in
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
0001 = Length 1 is 1 Character
Enter/Exit Programming Mode
representing your
CANCEL
189