Maxicode Length Control; Maxicode Set Length 1 - Datalogic PowerScan PBT950X Product Reference Manual

2D Global Features

Maxicode Length Control

This feature specifies either variable length decoding or fixed length decod-
ing for this symbology.
Variable Length:
length may be set.
Fixed Length:
DEFAULT
$CMXLC01(CR)
Maxicode Length Control = Fixed Length

Maxicode Set Length 1

Specifies one of the bar code lengths for
is the minimum label length if in
length if in Fixed Length Mode. Characters can be set from 0001 to 0145
characters in increments of 0001 (pad with zeroes).
See page 281
$CMXL1
Select Maxicode Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
For variable length decoding, a minimum and maximum
For fixed length decoding, two different lengths may be set.
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
$CMXLC00(CR)
Maxicode Length Control = Variable Length
Maxicode Length
Variable Length Mode, or the first fixed
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
Control. Length 1
repre-
187