Table of Contents
Advertisement
MAXICODE
Maxicode Length Control
This feature specifies either variable length decoding or fixed length decoding for this
symbology.
Variable Length:
be set.
Fixed Length:
$CMXLC00
Maxicode Length Control = Fixed Length
Maxicode Set Length 1
Specifies one of the bar code lengths for "
1 is the minimum label length if in Variable Length Mode, or the first fixed length if in
Fixed Length Mode. Characters can be set from 0001 to 0145 characters in increments
of 0001 (pad with zeroes).
See "
Select Maxicode Length 1 Setting
$CMXL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
For variable length decoding, a minimum and maximum length may
For fixed length decoding, two different lengths may be set.
Set Length 1" on page 241
0001 = Length 1 is 1 Character
Maxicode Length Control = Variable Length
Maxicode Length Control" on page 199
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
ENTER/EXIT PROGRAMMING MODE
$CMXLC01
Appendix E, Keypad
represent-
CANCEL
PRODUCT REFERENCE GUIDE
. Length
199
Advertisement
Table of Contents
