Aztec Code Set Length 1 - Datalogic Gryphon Series Product Reference Manual

Aztec Code

Aztec Code Set Length 1

Specifies one of the bar code lengths for
label length if in
Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See page 265
$CAZL1
Select Aztec Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
Product Reference Guide
Variable Length Mode, or the first fixed length if in Fixed Length Mode.
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Aztec Code Length Control. Length 1 is the minimum
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
CANCEL
representing your
205