Aztec Code Set Length 1 - Datalogic QuickScan I QD24 Series Product Reference Manual

Aztec Code Set Length 1

Specifies one of the bar code lengths for
Variable Length Mode, or the first fixed length if in Fixed Length Mode. Characters can be set from 0001 to 3,832
characters in increments of 0001 (pad with zeroes).
See page 217 for detailed instructions on setting this feature.
$CAZL1
Select Aztec Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Aztec Code Length
DEFAULT
Control. Length 1 is the minimum label length if in
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
0001 = Length 1 is 1 Character
Enter/Exit Programming Mode
representing your
CANCEL
177