Aztec Code Set Length 1 - Datalogic PowerScan PBT950X Product Reference Manual

Enter/Exit Programming Mode

Aztec Code Set Length 1

Specifies one of the bar code lengths for
1 is the minimum label length if in
length if in Fixed Length Mode. Characters can be set from 0001 to 3,832
characters in increments of 0001 (pad with zeroes).
See page 281
$CAZL1
Select Aztec Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
178
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Aztec Code Length
Variable Length Mode, or the first fixed
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
2D Global Features
Control. Length
repre-