Codabar Set Length 1 - Datalogic QuickScan I QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Codabar Set Length 1

This feature specifies one of the bar code lengths for
the minimum label length if in
includes the bar code's start, stop, check and data characters. The length must include at least one data character.
The length can be set from 3 to 50 characters.
Table 13 provides some examples for setting Length 1. See
Table 13. Codabar Length 1 Setting Examples
STEP ACTION
Desired Setting (and pad
1
with leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CCBL1
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
142
Variable Length Mode, or the first fixed length if in
03 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABAR LENGTH 1 SETTING
'0' and '3'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Codabar Length ControlCodabar Length
page 217 for detailed instructions on setting this feature.
EXAMPLES
09 Characters
'0' and '9'
~
03 = Length 1 is 3 Characters
Control. Length 1 is
Fixed Length Mode. Length
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
QuickScan™ I QD24XX