Table of Contents
Advertisement
Enter/Exit Programming Mode
Codabar Set Length 1
This feature specifies one of the bar code lengths for
trolCodabar Length
able Length
includes the bar code's start, stop, check and data characters. The length
must include at least one data character. The length can be set from 3 to 50
characters.
Table 14
detailed instructions on setting this feature.
Table 14. Codabar Length 1 Setting Examples
STEP
ACTION
Desired Setting (and pad
1
with leading zeroes)
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODABAR LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
$CCBL1
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
142
Control. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
provides some examples for setting Length 1. See
EXAMPLES
03 Characters
'0' and '3'
03 = Length 1 is 3 Characters
DEFAULT
Fixed Length
09 Characters
15 Characters
'0' and '9'
'1' and '5'
~
CANCEL
PowerScan™ PD953X/PBT950X/PM950X
Codabar Length Con-
Vari-
Mode. Length
page 281
for
50 Characters
'5' AND '0'
Advertisement
Table of Contents
