Table of Contents
Advertisement
Figure 106. Release the bezel
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing the bezel
Use this information to install the bezel.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 29.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To install the bezel, complete the following steps.
Step 1.
Unlock the left-side cover, using the key that comes with the server.
Note: You must unlock the left-side cover to open or remove the bezel. When you lock the left-side
cover, it locks both the cover and the bezel.
Step 2.
Align the hinge assemblies with the hinge trough on the chassis.
Step 3.
Push the hinges into the troughs on the chassis until they snap into place.
186
System x3500 M5 Installation and Service Guide
Bezel
Advertisement
Table of Contents
Troubleshooting
