6. (Trained technician only) Replace the system board.
•
806f0008-0a01xxxx : [PowerSupplyElementName] has been added to container
[PhysicalPackageElementName]. (Power Supply 1)
This message is for the use case when an implementation has detected a Power Supply has been added.
May also be shown as 806f00080a01xxxx or 0x806f00080a01xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0084
User Response
No action; information only.
•
806f0008-0a02xxxx : [PowerSupplyElementName] has been added to container
[PhysicalPackageElementName]. (Power Supply 2)
This message is for the use case when an implementation has detected a Power Supply has been added.
May also be shown as 806f00080a02xxxx or 0x806f00080a02xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0084
User Response
Appendix A. Integrated Management Module II (IMM2) error messages
423