Installing the bezel
To install the bezel, do the following:
1. Align the hinge assemblies with the hinge holes on the chassis.
2. Push the hinges into the holes on the chassis until they snap into place.
3. If however, the bezel was removed by detaching the sliding hinge mount from
154
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual
1
Bezel
2
Hinge assembly
3
Retention tabs
the hinge assembly (using the breakaway method as the bezel was designed to
do), complete the following steps to reattach the bezel:
a. Press in on the rear of the sliding hinge mount until it extends beyond the
edge of the bezel and hold it in place.