Table of Contents
Advertisement
Step 6.
Disconnect all connected cables from the system board (see "Internal cable routing and
connectors" on page 33).
Step 7.
Remove the power supplies (see "Removing a hot-swap power supply" on page 243).
Step 8.
Remove the system board (see "Removing the system board" on page 288),
Step 9.
Grasp on the plunger of paddle card cage assembly and pull it toward the front of the server
firstly, then, lift it out of the server.
Plunger
Figure 184. Power paddle card cage assembly removal
Step 10. Disconnect the cables from the power paddle card (see "Internal cable routing and connectors" on
page 33).
Step 11. Loosen the 4 screws to release the fixed power paddle card.
266
System x3500 M5 Installation and Service Guide
Power paddle card cover
1
2
Advertisement
Table of Contents
Troubleshooting
