Table of Contents
Advertisement
Figure 76. Installation tool
Figure 77. Installation tool removal
Attention:
• Do not press the microprocessor into the socket.
• Make sure that the microprocessor is oriented and aligned correctly in the socket before
you try to close the microprocessor retainer.
• Do not touch the thermal material on the bottom of the heat sink or on top of the
microprocessor. Touching the thermal material will contaminate it.
Step 8.
Remove the cover from the retainer bracket, if one is present. Store the cover in a safe place.
.
Chapter 2
Installing optional devices
89
Advertisement
Table of Contents
Troubleshooting
