Table of Contents
Advertisement
Heat sink
release lever
Figure 201. Rotate heat sink
Step 5.
Open the microprocessor socket release levers and retainer:
3
2
Figure 202. Open the microprocessor socket release lever
a.
Identify which release lever is labeled as the first release lever to open and open it.
b.
Open the second release lever on the microprocessor socket.
c.
Open the microprocessor retainer.
Attention: Do not touch the connectors on the microprocessor and the microprocessor socket.
Step 6.
Install the microprocessor on the microprocessor socket:
a.
Touch the static-protective package that contains the new microprocessor to any unpainted
on the chassis or any unpainted metal surface on any other grounded rack component; then,
carefully remove the microprocessor from the package.
Lock tab
Retainer bracket
Microprocessor
release levers
1
.
Chapter 6
Removing and replacing components
279
Advertisement
Table of Contents
Troubleshooting
