Table of Contents
Advertisement
Figure 195. Installation tool A handle adjustment
• If using Installation Tool B,
microprocessor installation tool handle counterclockwise to the open position, and then
release the interlock latch. The following illustration of the installation tool shows the
location of the interlock latch and counterclockwise rotation of the handle before loading
the microprocessor.
Figure 196. Installation tool B handle adjustment
b.
Align the installation tool with the alignment pins on the microprocessor socket and carefully
lower down the tool on the microprocessor. The installation tool rests on the socket only
if aligned correctly.
274
System x3500 M5 Installation and Service Guide
Installation tool
Microprocessor
1
lift the interlock latch and hold it up while you
2
twist the
Advertisement
Table of Contents
Troubleshooting
