Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0331
User Response
No action; information only. PCI 2 : PCI 3 : PCI 4 : PCI 5 : PCI 6 : PCI 7 :
•
816f0028-2101xxxx : Sensor [SensorElementName] has returned to normal on management
system [ComputerSystemElementName]. (TPM Cmd Failures)
This message is for the use case when an implementation has detected a Sensor returned from
degraded/unavailable/failure.
May also be shown as 816f00282101xxxx or 0x816f00282101xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Warning - Other
SNMP Trap ID
60
CIM Information
Prefix: PLAT ID: 0399
User Response
No action; information only.
•
816f0107-0301xxxx : An Over-Temperature Condition has been removed on
[ProcessorElementName]. (CPU 1)
This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070301xxxx or 0x816f01070301xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Appendix A. Integrated Management Module II (IMM2) error messages
781