Table of Contents
Advertisement
Fan-locking handle
Figure 147. Insert fan into the socket
Step 6.
Install and lock the left-side cover (see "Replacing the left-side cover" on page 99).
If you have replaced a server component or installed an optional device in the server, you need to reconnect
the power cords and all external cables, and turn on the server and peripheral devices.
Removing the system battery
Use this information to remove the system battery.
The following illustration shows the location of the system battery.
Figure 148. System battery
2
Fan
1
Battery
.
Chapter 6
Removing and replacing components
227
Advertisement
Table of Contents
Troubleshooting
